Save 2% when you place your order online.
Home > Cutterheads > Hydro > Insert Hydroheads

Two Choices For Hydro Insert Planing Heads - Spiral Insert and Hydro Helicarb


WEINIG Spiral Insert Hydo Heads

For non-jointed applications of up to 200 ft. per minute.

Similar in characteristics to the smooth-bore spiral cutterheads, but with the following additional benefits:

• Mounted on a hydro sleeve for true running accuracy.
• Higher feed speeds attainable.
• No grinding required.
• Maximum speed of 8,000 rpm.

Each cutterhead includes a full set of installed inserts.
Delivery: Approximately 5 weeks

You can choose bore diameters of 1 13/16", 2 1/8" or 50mm at the same price.

Contact the WEINIG Tooling Department for pricing:



Helicarb Hydro Heads

A joint effort between WEINIG and Great Lakes Custom Tool has produced a Helical Planerhead with a non-segmented knife!

Among the distinct advantages of this tool are:
• Eliminates tearout in hardwoods and knotty material
• One continuous, uninterrupted cutting edge
• Inserts can be resharpened on a Weinig R960 grinder
• True running accuracy within 0.0005"
• Can be constructed in PowerLock or conventional tooling also

Each cutterhead contains a full set of installed inserts. Selection of either 5, 10, or 15 degree knives, dependent upon the application.
All Hydro Heads = 160mm OD

Available As:
Hydro-Planerheads With 1 13/16", 2 1/8" or 50mm Bore

Spindle usage (Right Hand or Left Hand) required when ordering.
Maximum 9000 RPM

Contact the WEINIG Tooling Department to order.

Width

Number of Knife Slots

Hydro Bore Price U.S.$

MM

Inches

75

2 61/64"

3

1757.00

115

4 17/32"

3

2264.00

170

6 11/16"

3

2985.00

235

9 1/4"

3

3580.00

75

2 61/64"

4

2016.00

115

4 17/32"

4

2614.00

170

6 11/16"

4

3461.00

235

9 1/4"

4

4176.00

75

2 61/64"

6

2592.00

115

4 17/32"

6

3385.00

170

6 11/16"

6

4536.00

235

9 1/4"

6

5471.00


Sort By:
Page of 1
Hydro Helic Head - 160 x 330 x 1 13/16, z3
Hydro Helic Head - 160 x 330 x 1 13/16, z3
Our Price: $1,885.00

Hydro Helic Planerhead -- 160 OD x 310mm (12.2") working length x 1 13/16" spindle diameter, z3
To be used as a roughing tool on 1st bottom or 1st top.
Inserts can be ground on Weinig R960 series grinders by using knife rest insert 930013024HEL2
more info
Hydro Spiral Head - 160 x 330 x 1 13/16, z3 effective
Hydro Spiral Head - 160 x 330 x 1 13/16, z3 effective
Our Price: $2,275.00

Hydro Spiral Planerhead -- 160 OD x 330mm (13") working length x 1 13/16" spindle diameter, z3 effective (6 rows of knives) more info