Corrugated Heads
• Standard cutting angle 20°, or 12° for selected hardwoods that present tear-out problems on lower-RPM moulders
• High-tensile steel body
• Designed for use with 1/4" or 5/16" thick knives with 16-60° corrugations. Different gibs are required for 3/8" thick knives.
• For exclusive use on WEINIG Powermat Moulders
• Rated for operation up to 12,000 rpm (8000 RPM for heads longer than 240mm)
• Designed for Weinig Axial Constant Setup System
6-Knife Heads Available Upon Request